Dust Control – Soil Stabilization – Erosion Control

Posts Tagged ‘dust control systems’

In order to limit exposure to silica and prevent silicosis, a circular issued by the labour department has asked industries, factories, project developers and contractors employing workers as stone crushers, stone quarry, construction work, glass manufacturing, quartz crushing, stone mines and other silicon dust producing works, to ensure the control of dust at work site.

They must also eliminate the use of abrasive blasting materials that contain more than one per cent crystalline silica and use dust control methods such as blast cabinets and wet drilling or sawing, it said, adding that the employers must also maintain dust control systems.

The workers must wear disposable or washable protective clothing, take shower and change clothes before leaving the worksite if possible, the circular said, adding there must be a regular monitoring of air to ensure that control systems are working.

Workers must be provided with respirators approved for protection to be used against crystalline silica containing dust when levels can not be kept below the Permissible Exposure Limit (PEL), it said adding the employers must provide medical check-ups to workers exposed to crystalline silica.

Workers must be provided with protective equipment and training materials on the health effects of silica exposure, it added.

AIR interchange consultant Fanquip has united its many technologies as well as know-how to meet the requirement for niche sized fixed and relocatable dust control processes for the construction segment. These products are matched to companies mixed up in cement workings and linked products similar to sand and limestone that can simply become airborne also potentially affect not just personnel but neighboring neighborhoods too.

Fanquip of late designed and manufactured for a user in the construction industry a solution to capture concrete dust that fell from tipper trucks operating over hoppers and stockpiles. There was concrete dust escaping everywhere, but with a procedure about a sluice the Fanquip dust collection solution nowadays catches it.

Fanquip is combining its fan technologies, to give dust repression units for rapid operation and re-use when mandated. Adept to handle a wide range of dust particle sizes from considerable and coarse right down to fines and clinker, the option of either fixed units or relocatable units that are cheap to run and specific ensures that broad-spectrum dust control, as a necessary safety solution, is now simply affordable for companies of all sizes.

The Occupational Safety and Health Administration (OSHA) is a useful resource on controlling dust. In Chapter 3 of the OSHA handbook, it explains why dust should be controlled, the various forms of dust control systems that are available, and how to select the correct one, and how to design a water spray system to limit the spread of dust.

Some reasons why dust should be controlled are to reduce and prevent the chance of dust explosions and fires. Also the reduction of accidents is greater with better visibility of the workplace. Reducing dust will also decrease the wear and tear on equipment and minimize the need for maintenance. For employees, less dust will require less protective gear that is needed as well as reduce the possibility of foul odors, which can have a negative effect on productivity.

Read the rest of this entry »

Whether you’re a professional or a do it yourself home remodeler, dust is a problem that occurs on most jobs. Professional remodelers know that clean up takes time, but not cleaning the area after you’re finished ruins relationships and loses clients. Do-it-yourselfers can see the face of their spouse when they mention another project. Clean up is more than just cleaning the area; it means removing dust that flies all over the house. 

There are steps to reduce the amount of dust and therefore the time it takes to clean up the area. One of these is plastic, tape, staples and 2 by 4’s. Normally putting up this type of barrier is not a one-man job, if you do it alone it takes time, lots and lots of wasted time. The professional knows how important dust free construction is to the homeowner, so they take the time for two or more men to install the barrier. Most home do-it-yourselfers don’t bother, so normally projects create weeks of clean up as the dust settles throughout the house.

Now, there’s a product, which installs easily at the jobsite and blocks the dust from leaving the area. Zipwall dust control  systems include telescoping poles, plastic gripping heads with pads to protect the sealing, skid free discs for under the poles, locks to seal the side and best of all, zippers. That’s right, zippers. Getting in and out of a work area that’s taped up normally means you have to overlap some of the plastic and form a loose seal at the doors, which allows the dust to escape to other parts of the house. The Zipwall system allows you to keep the seal tight, even suck the dust out as you work by putting the hose of an operating vacuum under the plastic and not have one bit of dust go to another area of the house. The professional looking enclosed area and the dust free job site is enough to get the highest praise from even your meticulous client.

Read the rest of this entry »