Dust Control – Soil Stabilization – Erosion Control

Posts Tagged ‘documents and settings’

BRISTOL – Zoning issues surrounding a Tupelo Street business that have been floating around for several years could finally be resolved at the next Bristol Town Council meeting. ELJ Inc. of 703 Metacom Ave. has approached the town and is looking for a zoning change for its property at 95 Tupelo St. where it runs a stone-crushing operation.

Ed Tanner, Bristol zoning official, said a zoning change from general business to manufacturing at the site will make ELJ in compliance with town regulations.

Mr. Tanner said, as of now, the business is a non-conforming use. ELJ has argued in the past that the business is grandfathered because they used the property for similar uses before zoning at the property.

“They’ve done a lot of things to their operations to try to comply with our requests and the neighbors’ complaints about noise and dust,” Mr. Tanner said.

Read the rest of this entry »

FANQUIP’S Mining Division provides mines and quarries with total conceptual planning and custom design, heavy duty products, installation of ventilation and air control systems.

Company specialists can advise on strategic air control at the development stage or integrate into plants which have been in operation for some length of time. Fanquip’s Mining Division focuses on temperature control, ventilation, management of confined space environments, dust control  both in suppression and collection, and management of toxic gases and emissions.

News stories about companies converting to solar energy are becoming more and more prevalent. You see photos of solar arrays glistening in the sun, providing the clean energy that everyone covets. However, what you don’t see in the thirty second sound bite is all the work that went into getting those solar arrays sited, installed and operating.

Most people assume there are significant regulatory requirements for large utility scale projects to supply power to the grid. But even when a company is contemplating a smaller solar energy project to help power its facilities, there are many regulatory and permitting requirements that must not be overlooked in the planning of the project. Those requirements can create tremendous obstacles depending on the project’s complexity, size and location. Below are some tips on how to avoid regulatory roadblocks when implementing a solar energy system.

Tip 1: Know The Project Requirements

When planning a solar project, it is crucial to know the facility’s energy loads to determine the appropriate technology to utilize, as well as the applicable permitting requirements that might be triggered by that technology. A key initial step in any solar energy project that is often overlooked is an energy audit. Conducting an energy audit of the facility will establish a baseline for the energy needs the solar project must meet.

Read the rest of this entry »

RAIPUR: India’s largest private sector steel maker, Tata Steel, will invest Rs.2,000 crore on environment conservation at its Rs.19,500-crore plant coming up in Chhattisgarh’s militancy-hit Bastar district.

"Tata Steel officials made a presentation at a public hearing on Monday for environmental clearance and committed to invest Rs.2,000 crore on environment conservation," Bastar district collector M.S. Paraste, who presided over the meeting, told IANS.

Describing the hearing as "quite successful", Paraste said 2,044 hectares of land would be handed over to Tata Steel, probably by December.

District authorities have so far acquired about 80 percent of land across 10 villages in Lohandiguda block, some 340 km south of state capital Raipur, for the integrated plant that will produce 5.5 million tonnes of steel annually.

Read the rest of this entry »

Whether you’re a professional or a do it yourself home remodeler, dust is a problem that occurs on most jobs. Professional remodelers know that clean up takes time, but not cleaning the area after you’re finished ruins relationships and loses clients. Do-it-yourselfers can see the face of their spouse when they mention another project. Clean up is more than just cleaning the area; it means removing dust that flies all over the house. 

There are steps to reduce the amount of dust and therefore the time it takes to clean up the area. One of these is plastic, tape, staples and 2 by 4’s. Normally putting up this type of barrier is not a one-man job, if you do it alone it takes time, lots and lots of wasted time. The professional knows how important dust free construction is to the homeowner, so they take the time for two or more men to install the barrier. Most home do-it-yourselfers don’t bother, so normally projects create weeks of clean up as the dust settles throughout the house.

Now, there’s a product, which installs easily at the jobsite and blocks the dust from leaving the area. Zipwall dust control  systems include telescoping poles, plastic gripping heads with pads to protect the sealing, skid free discs for under the poles, locks to seal the side and best of all, zippers. That’s right, zippers. Getting in and out of a work area that’s taped up normally means you have to overlap some of the plastic and form a loose seal at the doors, which allows the dust to escape to other parts of the house. The Zipwall system allows you to keep the seal tight, even suck the dust out as you work by putting the hose of an operating vacuum under the plastic and not have one bit of dust go to another area of the house. The professional looking enclosed area and the dust free job site is enough to get the highest praise from even your meticulous client.

Read the rest of this entry »

But Al Gore Lied and the data was manipulated…

Climate change represents a greater threat to mining operations than many realize, and most fail to plan or implement any preventative measures, according to Jason Prno, president of the North Bay-based Trailhead Consulting.

"Most mining infrastructure is not designed for a changing climate," says Prno, who researched the threat the weather could pose to the industry in a study for the David Suzuki Foundation.

"The subject often takes a backseat to economic issues, legislation and as such, there tends to be little adaptive planning in place."
Speaking to attendees of the 2009 Sudbury Restoration Workshop held at Laurentian University on Oct. 28, Prno outlined how the expected temperature increases have already begun to impact the mining industry.

As an example, he points to the Rio Tinto/Harry Winson Diavik diamond mine in the Northwest Territories, where 2006 stood as the warmest winter on record. The elevated temperatures reduced the availability of the ice road from roughly 70 days to 42, forcing officials to fly in much more freight than usual. This resulted in additional costs of $11.3 million just for fuel transportation, presenting "a real wake-up call" for the industry, says Prno.
Similarly costly scenarios are being projected for other parts of the country.

Ontario can expect to see elevated temperatures that could lead to drier summers, affecting a mine’s water intake, and potentially exposing raw tailings to the elements. The scarcity of water could also affect activities such as dust suppression  and the composition of mine drainage.

Read the rest of this entry »

Federal officials unveiled a three-pronged strategy to combat black lung disease during a meeting Thursday at the National Mine Health and Safety Academy in Beaver.

Mining officials and medical experts say education, stricter enforcement and new regulations can curb the disease, which has been on the rise in the region and has killed some 10,000 miners in the last decade.

Thursday’s meeting was the first of four informational sessions planned by Mine Safety and Health Administration.

“There is a collective agreement that we have to fix this problem,” MSHA Director Joseph Main told a packed room that included representatives from mining companies, the United Mine Workers of America and former miners suffering from the ailment.

Read the rest of this entry »

The Nevada Department of Environmental Protection conducted a public hearing Wednesday to hear community concerns on the NDEP’s recommendation to approve a permit that would allow Bango Oil to discharge up to 5 million gallons of treated effluent annually.

The discharge area is uphill from the Carson River and near the Truckee Canal and has a general groundwater depth as high as 16 feet.

Tom Clark, director of governmental affairs and public relations for Bango, said the company requested this permit as a part of a Special Environmental Project issued by the NDEP.

Read the rest of this entry »

Here is the problem. When you use a dust suppression product like Top-Seal Dust Control, You cause the soil to become less permeable. Thus Causing the water in the lake to stay in the lake. Eventually you will Flood your Solar Farm and then it will just be a nice place to dive.

In Los Angeles, California, the city’s Department of Water and Power (DWP) is eyeing flat, dusty, arid Owens Lake as the potential site for a future mega-solar farm, but the initiative is focused less on clean, renewable solar energy than on preventing the interminable dust storms generated by the dry lake bed.

Owens Lake started to run dry when, in 1913, the city began diverting water from the Owens River. By 1926, the former lake was a shallow hardpan. Today, it ranks as the largest single source of PM10 dust (windborn dust particles smaller than 10 microns) in the United States. In fact, one estimate suggests the lake produces up to 8 million metric tons per year.

The DWP thinks that covering 616 acres of the lake bed with solar panels could cut down on dust storms, which threaten the health of nearby Keeler and Ridgecrest residents by delivering up to 23 times the amount of airborne particulate matter federal levels suggest as safe.

Read the rest of this entry »

Hinowa has introduced a crawler mounted dust suppression system through the marriage of its Goldlift 14.70 tracked carrier to a WPL410 rotating water spray system. The Goldlift 14.70 is able to elevate the nozzle to a maximum height of 12 m (39.4 ft) to maximise the throw area. The WLP410 itself has a maximum throw distance of 30 m (98.5 ft), offers 320º rotation and can cover up to 2,800 square metres (30,100 square feet). Recommended operating pressure is 10 Bar, at which pressure it uses 35 litres (7.7 gallons) of water per minute. Hinowa has also made this unit available on its TP1800 tracked forklift.