Dust Control – Soil Stabilization – Erosion Control

Archive for the ‘Road Dust Control Products’ Category

There are different types of construction dust that is created at the workplace. The type of construction and location of the site will determine what is in the air.

The dryer regions of the country have a problem with particle matter floating in the air whose make up is different than wetter regions where the nuisance dust could be from the saw dust that the building tools create. The cleaning up of the loose debris is the solution for most dust problems that are actually created on the construction site that is directly caused by the construction process. The health hazards of construction site dust could include cement residue, asbestos, mineral fibers with a man made origin and the most common is wood dust.

The reason for the concern is the effects it has on the people working at the site and the surrounding region. When natural sources of dust from plants and animals combine with the airborne particles of the construction site, it could adversely affect the membranes of the occupance.

The US Department of Health and Human Service’s National Institute for Occupational Safety and Health consider silicosis has a major problem and cause of health problems that has its origins from construction dust . Construction dust control from the particle matter smaller the 10 micrometers or PM10 has to be approached from a different perspective than those that are naturally occurring in our environment

The airborne crystalline silica that originates from the concrete, masonry and rock on the site can become lodged in the membranes and lungs of the respiratory systems of the people on and near the site. Once there, they become hardened and cause permanent damage and even death.

Construction dust control for this problem can be accomplished when the proper precautions are taken along with the right equipment. The blades that are used to cut concrete and other masonry items should be equipped with a water attachment to make the dust to heavy to become airborne. When drilling into rock the same accessory should be used to weigh down the dust and prevent it from becoming airborne.

Cleanup afterwards is just as important. The water that was used to weigh down the dust particles will evaporate over time. Collection and proper disposal is a necessary part of keeping the work site as free as possible of nuisance dust.

Another little thought about source of silica is from the abrasive materials that are used on the construction site. This includes the silica paper and sanding discs that are used to prepare and condition the different surfaces around the site. When these materials are used, the operator should be using a dust mask on themselves to prevent inhalation of the particle matter.

The US Government classifies nuisance dust that is created by the landscape as a natural event under the air pollution laws. This is a contributor to the construction dust problem but not the whole cause. With the proper precautions control of construction dust can minimize the adverse effects in the people on and near the construction site.

To help you with determine specifically what is best for your situation there is a valuable resource with information on this environmental topic at Soil Control International and their informative blog site.

The fugitive dust that is around us is not on the run from the law, but in some cases should be. It is true that this type of dust has been around since the dawn of time caused by wind sweeping across the barren landscape.

This type of dust is scientifically described as particular matter. This is airborne debris that can adversely affect the health of people and the environment. The most common particulate matter is smaller than 10 micron in diameter and is called PM10. The second most common is PM2.5. This is debris that is smaller than 2.5 microns in diameter.

As man has evolved, so has his impact on the surrounding environment. The process of the fine particles that are being introduced into the atmosphere is becoming more numerous as time goes on. This was first noticed in the days of the wagon trains when it was beneficial to be up front due to the dust cloud that was created.

Read the rest of this entry »

An approach to road dust control  must take into account the type of road and the terrain in which it is situated. The solution for a paved road in the desert will be very different than a gravel road in the rural upper Midwest. Since nuisance dust has many sources in the environment, a permanent solution is not feasible. But there are long term solutions and very short term solutions to road dust .

The shortest term solution is the spraying of water on the road surface. This is an environment-friendly solution, but only lasts until the water evaporates. Oils are a longer term solution, but are not nearly as environmentally friendly as water is. In some cases, like with Times Beach in Missouri, the oils are from a waste source and contain toxins. The oil that was used as the road dust control  product for Times Beach was only 6 cents a gallon, but contained dioxin and other toxic chemicals. This was an economical solution for the town and its dust problem, but a health and environmental nightmare. This has lead to a ban by many states for the use of waste oils as a road dust control product.

Read the rest of this entry »

Most Americans are not fully aware of the road dust problem that exists across the nation. This dust is of a different makeup from what is found around in most homes. The dust that accumulates around on the furniture is made up of some dirt particles, but its main component is dead human skin cells that have fallen off the occupants of the dwelling.

For a particle to be considered dust, it must be smaller than 500 micrometers in size. This is why HEPA filters are used on vacuum cleaners and as part of the HVAC units in the homes, they trap 99.97% of all particles that are 0.03 micrometers in size.

Nuisance dust from the roads has a completely different composition and source. This dust is produced when the soil is disrupted and made airborne from wind or a passing vehicle, pollutants in the air, and the occasional volcanic dust that lingers around in the atmosphere.

Read the rest of this entry »